GLUE JOINT RIP SAW BLADES
Products:

These saw blades are perfect for component part production that requires an extra smooth cut, such as solid wood pieces that will be glued together. Our saw blades can be bored out to fit most rip or table saws. For best results, our glue joint blades should be used for ripping procedures only.
Glue Joint Saw Blades have a 20* hook standard.
10 - 16 Inch Diameter,
All have 20* Hook
10" Diam. ( TCG )
30 Teeth,( .125 Kerf x .087 Plate)
5/8" Bore
66.00
Standard bore, fits most machines
10" Diam. ( TCG )
30 Teeth,( .145 Kerf x .102 Plate)
5/8" Bore
93.00
Standard bore, fits most machines
12" Diam. ( TCG )
36 Teeth,( .160 Kerf x .118 Plate)
1.0" Bore
97.00
Standard bore, fits most machines
12" Diam. ( TCG )
36 Teeth,( .160 Kerf x .118 Plate)
70mm +2/20 x 5 Keys
100.50
Fits SCM
12" Diam. ( TCG )
36 Teeth,( .160 Kerf x .118 Plate)
3 1/8 + 1x1/4 Key
106.00
Mareen Johnson
12" Diam. ( LRLRS )
50 Teeth,( .134 Kerf x .094 Plate)
1.0" Bore
125.00
Standard bore, fits most machines
300mm Diam. ( TCG )
36 Teeth,( 4.2 Kerf x 3.2 Plate)
80mm(4x7,2x14)+2key
102.00
Fits Raimann
300mm Diam. ( TCG )
48 Teeth,( 2.8 Kerf x 2.0 Plate)
80mm(4x7,2x14)+2key
113.00
Fits Raimann
14" Diam. ( TCG )
36 Teeth,( .177 Kerf x .138 Plate)
1.0" Bore
124.00
Standard bore, fits most machines
14" Diam. ( ATB )
36 Teeth,( .177 Kerf x .138 Plate)
2.0( w/1x 9/16ph@5")
124.00
Fits Diehl
14" Diam. ( TCG )
36 Teeth,( .177 Kerf x .138 Plate)
2.0( w/1x 9/16ph@5")
124.00
Fits Diehl
16" Diam. ( TCG )
36 Teeth,( .177 Kerf x .138 Plate)
2.0( w/1x 9/16ph@5")
136.00
Fits Diehl
16" Diam. ( TCG )
50 Teeth,( .197 Kerf x .138 Plate)
1.0" Bore
211.00
Standard bore, fits most machines
16" Diam. ( TCG )
48 Teeth,( .180 Kerf x .138 Plate)
2.0" Bore
194.00
Standard bore, fits most machines
We look forward to working with you

Saw blades,    Table Saw Blades,     General Purpose ,      Gang Rip,    Precision Trim,     Panel Saw,    Glue Joint,    Radial Arm/Miter,

Sawblades-cutsmooth® All rights reserved