COMBINATION SAW BLADES
Products:
Combination Saw Blades are made for good all around performance when acceptable crosscuts and rips must be accomplished with one saw blade. We sell more combination blades than any other design. Larger gullets spaced after tip design repetitions accommodate for deeper cuts and ample saw dust removal.
7-16 INCH DIAMETER
7" Diam. ( ATB+R )
40 Teeth @ 15* Hook
( .126 Kerf x .087 Plate) 5/8" Bore
53.00
Standard bore, fits most machines
8" Diam. ( ATB+R )
40 Teeth @ 15* Hook
( .126 Kerf x .087 Plate) 5/8" Bore
62.00
Standard bore, fits most machines
9" Diam. ( ATB+R )
40 Teeth @ 15* Hook
( .126 Kerf x .087 Plate) 5/8" Bore
62.00
Standard bore, fits most machines
10" Diam. ( ATB+R )
40 Teeth @ 15* Hook
( .126 Kerf x .087 Plate) 5/8" Bore
60.25
Standard bore, fits most machines
10" Diam. ( ATB+R )
50 Teeth @ 15* Hook
( .126 Kerf x .087 Plate) 5/8" Bore
60.50
Standard bore, fits most machines
12" Diam. ( ATB+R )
50Teeth @ 15* Hook
( .134 Kerf x .094 Plate) 1" Bore
97.00
Standard bore, fits most machines
12" Diam. ( ATB+R )
60 Teeth @ 15* Hook
( .134 Kerf x .094 Plate) 1" Bore
103.50
Standard bore, fits most machines
14" Diam. ( ATB+R )
60 Teeth @ 15* Hook
( .160 Kerf x .110 Plate) 1" Bore
118.00
Standard bore, fits most machines
14" Diam. ( ATB+R )
70Teeth @ 15* Hook
( .160 Kerf x .110 Plate) 1" Bore
132.00
Standard bore, fits most machines
16" Diam. ( ATB+R )
60 Teeth @ 15* Hook
( .165 Kerf x .118 Plate) 1" Bore
136.00
Standard bore, fits most machines
16" Diam. ( ATB+R )
80 Teeth @ 15* Hook
( .165 Kerf x .118 Plate) 1" Bore
153.75
Standard bore, fits most machines
Saw blades,Table Saw Blades, General Purpose , Gang Rip, Precision Trim, Panel Saw, Glue Joint, Radial Arm/Miter, Combination, Thin Kerf, Conical, Melamine/Laminate, HardiPlank™, Solid Surface, Contractor Series, Custom Sawblades-cutsmooth® All rights reserved